1.support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked! Do not need to read the manual;
2.support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:
A.ST-LINK Utility 2.0 and 4.2.1 above
B.STVD and above
C.STVP 3.2.3 and above
D.IAR EWARM V6.20 and above
E.IAR EWSTM8 V1.30 and above
F.KEIL RVMDK V4.21 and above
3.support for automatic firmware upgrades to ensure follow-up support ST products. The factory firmware has been upgraded to the latest V2.J17.S4;
4.increase the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage!
5.the interface easy to use copper gilded horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring;
6.the use of U disk aluminum housing protects the motherboard, easy to carry, is not afraid of static electricity, afraid to fall throw touch.
7.with data package, containing: (e-file, disk, and network support Baidu QQ mailbox to send)
A.STLINK / V2 driver;
B.KEIL MDK (4.60) development environment (and other common development environments)
C.IAR STM8 (1401) development environment (and other common development environments)
D.STVD STM8 development environment (and other common development environments)
E.a number of classic STM32 information (including a large number of source code examples and video tutorials)
F.a number of classic STM8 information (including a large number of source code examples and learning experience)
NOTE:Its color is randomly!!!
Description: 1. Support the full range of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address Don\’t need to read instructions 2, support all series STM8 SWIM download debugging (common development environment such as IAR, STVD etc.) are supported. Support the software version is as follows: ST – LINK Utility 2.0 and above STVD 2 and above STVP 3.2.3 and above IAR EWARM V6.20 and above IAR EWSTM8 V1.30 and above KEIL RVMDK V4.21 and above 3. Support the firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2. The J17. S4. 4. Increase the 5 v power output, the output it can protect the I/O port, not afraid of error cause damage of ST – LINK V2 5. Easy interface to use pure copper plating 2.54 spacing horn, with 20 cm dupont line, can deal with different target board line sequence, flexible connection; 6. Use U disk aluminum alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling. Package included:
1 x ST-Link V2 STM8 STM32 Emulator / Download / Programmer
1 x dupont cable
STM32F4DISCOVERY/STM32F407G-DISC1, Discovery kit for STM32 F4 series – with STM32F407 MCU
The STM32F4DISCOVERY helps you to discover the STM32F4 high-performance features and to develop your applications easily. It includes everything required for beginners and experienced users to get started quickly.
Based on the STM32F407VGT6, it includes an ST-LINK/V2-A embedded debug tool, two ST MEMS, digital accelerometer and digital microphone, one audio DAC with integrated class D speaker driver, LEDs and push buttons and an USB OTG micro-AB connector.
A large number of free ready-to-run application firmware examples are available on www.st.com/stm32f4-discovery to support quick evaluation and development.
STM32F407G-DISC1 x 1
Copy below to buy the suitable one for you:
Open407V-D Standard: www.amazon.com/gp/product/B00CW9JILY
Open407V-D Package A: www.amazon.com/gp/product/B00CW9NA6S
Open407V-D Package B: www.amazon.com/gp/product/B00CW9TCWO
ST-Link V2 st link STM32 STM8 emulator debugger download error search programmer If you want to buy more,please contact us.we will offer you a surprised price. product launch: / V2 ST link is a set of simulation error search download tools developed by ST (), which can be downloaded or simulated to the ST 8 bit STM8 series, 32 bit STM32 series MCU. The shop alone design and development, technical support, super weapon to study the development of ARM, user-friendliness! basic features / V2 ST is a set of development tools that are downloaded the ST-Link (Italian methode semiconductor). STM8 series through the SWIMMING interface and / V2 ST-Link connection. STM32 series through the swd interface and / V2 ST link connection. / V2 ST link by high speed PC and USB2.0 end connection. Supports objects: Support all STM8 Series MCU with SWIMM interface Support all STM32 series mcu with swd interface connection mode: SWD mode and SWIMMING mode Supports IDE software Utility v2.0 ST-LINK (and higher) Version 4.2.1 STVD (and higher) Version 3.2.3 STVP (and higher) EWARM Revision v6.20 IAR (and higher) EWSTM8 Revision v1.30 IAR (and higher) RVMDK Revision v4.21 KEIL (and higher) Function and performance Programming function: can be burnt to write ROM EEPROM, -, AFR, etc .. Simulation functions: to support full speed operation, single step debugging, halftone error search and other error-finding methods, can change the state of IO, variable data, etc. Programming power: the use of USB2.0 interface, SWD / SWIMMING download, download-speed! Simulation performance: the use of USB2.0 interface for simulation debugging, single step debugging, halftpunkt debugging, quick response! Firmware upgrade Upgrade mode: automatic updating, the branch ST-Link / V2 and the official website of this function is fully consistent, and can perform automatic firmware upgrade, factory standard firmware for the latest: JTAG + SWIMMING debugger V2.J17. S4
STM32F4DISCOVERY STM32F407G-DISC1 STM32F407 Cortex-M4 Development Board With ST-LINK/V2-B Description: The STM32F4DISCOVERY development board is designed based on STM32F407VGT6. Integrating ST-LINK/V2 simulation downloader (but only provide external SWD interface), which let you out of trouble with another purchase of downloader or emulator. It includes two ST MEMS, digital accelerometer and digital microphone, one audio DAC with integrated class D speaker driver, LEDs and push buttons and an USB OTG micro-AB connector. Emulator upgrade to ST-LINK / V2-B Supports virtual serial ports, supports MBED download Support U disk download Feature: STM32F407VGT6 microcontroller: 32-bit ARM Cortex-M4F core Flash: 1024KB RAM: 192KB Encapsulation: LQFP100 Board power supply: Through USB bus External 5V supply voltage External application power supply: 3V and 5V Sensors: LIS302DL or LIS3DSH (ST MEMS 3-axis accelerometer) MP45DT02 (ST MEMS audio sensor, omni-directional digital microphone) Audio driver: CS43L22 (audio DAC with integrated class D speaker driver) Eight LEDs: LD1 (red/green): USB communication LD2 (red): 3.3 V power on LD3 (orange): user LED LD4 (green): user LED LD5 (red): user LED LD6 (blue): user LED LD7 (green): USB OTG LED (VBus) LD8 (red): USB OTG LED (over-current) Push buttons: User Reset USB OTG FS: Micro-AB connector Others: On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging) Extension header for all LQFP100 I/O for quick connection to prototyping board and easy probing Package included: 1 x STM32F4DISCOVERY STM32F407 Cortex-M4 Development Board. If there is a size or colour choice please email me with your choice or it will be sent at random.
1.100% Brand new and high quality.
2.Support the full range of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address! Don’t need to read instructions!
3.Support all series STM8 SWIM download debugging (common development environment such as IAR, STVD etc.) are supported. Support the software version is as follows:
ST – LINK Utility 2.0 and above
STVD 2 and above
STVP 3.2.3 and above
IAR EWARM V6.20 and above
IAR EWSTM8 V1.30 and above
KEIL RVMDK V4.21 and above
4.Support the firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2.J17.S4
5.Increase the 5 v power output, the output it can protect the I/O port, not afraid of error cause damage of ST – LINK V2!
6.Easy interface to use pure copper plating 2.54 spacing horn, with 20 cm DuPont line, can deal with different target board line sequence, flexible connection;
7.Use U disk aluminum alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling.
8.Material: Metal, plastic, electronic parts
9.Color: Red, Blue, Green, Yellow, Black, Purple, Brown, Silver (We will send color at random, thank you for your understanding)
10.Size: Approx. 5.5 x 2 x 0.8cm (L*W*H)
11.What’s in the package:1 x ST-Link V2 STM8 STM32 Programmer + 1 x 20cm Debug DuPont Line
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
* 5 V power supplied by a USB connector
* USB 2.0 full speed compatible interface
* USB standard A to mini B cable
* SWIM specific features
* * 1.65 V to 5.5 V application voltage supported on SWIM interface
* * SWIM low-speed and high-speed modes supported
* * SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
* * SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector
* * SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
* JTAG specific features
* * 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
* * JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
* Direct firmware update feature supported (DFU)
* Status LED which blinks during communication with the PC
* Operating temperature 0 to 50 °C
While connecting the ST-LINK/V2 to the computer through USB interface, the USB driver is required and should be installed correctly first.
ST-LINK/V2 × 1
USB type A to Mini-B cable × 1
20-pin JTAG/SWD flat ribbon × 1
4-pin SWIM cable × 1
4-pin SWIM custom connector cable × 1
STMICROELECTRONICS STM32L-DISCOVERY STM32L1, ON BOARD ST-LINK/V2, DISCOVERY KIT
Stm32 St Link Utility, Stm32 St Link Utility No Stlink Detected, Stm32 St Link Windows Driver, Stm32 St Link Utility V2 Download, Stm32 St Link Linux, Stm32 No St Link Detected, Stm32 St-link Utility User Interface, Stm32 St Link Driver Keil, Stm32 St-link Utility Linux
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The ArduinoTM connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger and programmer.
The STM32 Nucleo board comes with the STM32 comprehensive
STM32 microcontroller with LQFP64 package
Two types of extension resources
* Arduino Uno Revision 3 connectivity
* STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
On-board ST-LINK/V2-1 debugger/programmer with SWD connector
* selection-mode switch to use the kit as a standalone ST-LINK/V2-1
Flexible board power supply
* USB VBUS or external source(3.3 V, 5 V, 7 – 12 V)
* Power management access point
* USB communication (LD1), user LED (LD2), power LED (LD3)
Two push buttons: USER and RESET
USB re-enumeration capability: three different interfaces supported on USB
* Virtual Com port
* Mass storage
* Debug port
Supported by wide choice of Integrated Development Environments (IDEs) including IARTM, Keil®, GCC-based IDEs
NUCLEO-F446RE × 1
100% brand new and high quality
Designed to set in-circuit emulator and download as one of the development tools.
Very low-cost professional tool to debug and program STM8 and STM32MCUs
STM8 series via SWIM interface with ST-LINK / V2;
STM32 series connected via JTAG / SWD interface ST-LINK / V2.
ST-LINK / V2 connected to the PC via high speed USB2.0.
STM8: ST STVD, IAR EWSTM8
STM32: Atollic TrueSTUDIO,IAR EWARM,Keil MDK-ARM,TASKING VX-toolset
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1Pc x ST-Link/V2 Emulator Host
1PC x USB cable
1pc x Gray Cable
2pcs x Connecting cables for STM8 SWIM and STM32 JTAG/SWD protocols